Sunnylife Phantom 3/4 Filter - Standard Professional Advanced Camera Lens Filter CPL
- circular polarization filter for DJI Phantom 3 and 4
- filters out reflections in glass and water
- increases colour saturation and enhances contrast
- can be adjusted by turning (circular)
- 1x pro CPL filter, 1x plastic case with foam inlay
PRODUCT INFORMATION
Use
The polarization filter is still one of the filters used most often in photography. Polarization filters only let through light within a certain frequency range. All other light is filtered out. This filtering reduces reflections on glass and the surface of water or puddles. At the same time, they increase colour saturation and enhance contrast. Objects behind the glass (display cabinets, windscreens) become visible. For landscape photography, the polarization filter produces the best effect with a shooting angle of 90 degrees to the sun.
Functionality
Circular (CPL) and linear polarization filters work on the same principle. Optical grids on the filter film ensure that only linear light waves that are aligned with the grid reach the lens. Unlike a linear polarization filter, the circular polarization filter has an additional lambda/4 plate. This plate ensures that the linear light beams produced previously in the polarization filter are redistributed to all parts and are at an angle of 90 degrees to each other. At the same time, one part is delayed by a quarter of the wavelength. This means that behind the filter, all polarization directions are back again.
The polarization filter is the only filter whose effect cannot be achieved afterwards using image editing software. Reflections must be removed at the time the image was taken; after that, it's no longer possible.
Related Products
R 499.00
Quick View
{"id":7852525748442,"title":"PGYTECH 9.7 Inch Surrounded Lens Hood","handle":"pgytech-9-7-inch-surrounded-lens-hood","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003ePGYTECH 7.9 9.7 Inch Surrounded Lens Hood Remote Controller Monitor Hood for Tablets dji Phantom 3 4 Pro drone accessoriesPGYTECH 7.9 9.7 Inch Surrounded Lens Hood Remote Controller Monitor Hood for Tablets DJI Phantom 3 4 Pro drone accessories.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eBrand: PGY TECH\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eProduct name: Drone Aviator Hood kit \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eProduct material: High-quality leather\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eApplicable: Phantom Inspire whole series of remote control\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eProduct size and the suitable display screen:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 5.5 -inch: For mobile phones\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 7.9 -inch: Suitable for the mini device and 8 \"small tablet \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e (transmission hole in the middle)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 9.7 -inch: Applicable to the AIR and 9.7-inch large plate hole\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e center (transmission)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eProduct features: Full surrounded, quick-release combination remote hood,\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e Durable, eye shading, prevents dizziness, prevents metering.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eProduct color: Spruce Green and Ivory White.\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-11-17T13:19:58+02:00","created_at":"2022-11-17T13:19:58+02:00","vendor":"Phantom 3","type":"Drones","tags":["Phantom 3"],"price":49900,"price_min":49900,"price_max":49900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43490723954906,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DJI-H9.7-W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PGYTECH 9.7 Inch Surrounded Lens Hood","public_title":null,"options":["Default Title"],"price":49900,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB12s6EMVXXXXXGaFXXq6xXFXXXt.jpg?v=1668684328","\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1bk_ZMVXXXXXbXVXXq6xXFXXXO.jpg?v=1668684376","\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB11D_UMVXXXXcDXVXXq6xXFXXXF.jpg?v=1668684406","\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1q6fSMVXXXXafaXXXq6xXFXXXV.jpg?v=1668684452"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB12s6EMVXXXXXGaFXXq6xXFXXXt.jpg?v=1668684328","options":["Title"],"media":[{"alt":null,"id":30940322496730,"position":1,"preview_image":{"aspect_ratio":1.776,"height":563,"width":1000,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB12s6EMVXXXXXGaFXXq6xXFXXXt.jpg?v=1668684328"},"aspect_ratio":1.776,"height":563,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB12s6EMVXXXXXGaFXXq6xXFXXXt.jpg?v=1668684328","width":1000},{"alt":null,"id":30940328296666,"position":2,"preview_image":{"aspect_ratio":1.776,"height":563,"width":1000,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1bk_ZMVXXXXXbXVXXq6xXFXXXO.jpg?v=1668684376"},"aspect_ratio":1.776,"height":563,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1bk_ZMVXXXXXbXVXXq6xXFXXXO.jpg?v=1668684376","width":1000},{"alt":null,"id":30940332490970,"position":3,"preview_image":{"aspect_ratio":1.776,"height":563,"width":1000,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB11D_UMVXXXXcDXVXXq6xXFXXXF.jpg?v=1668684406"},"aspect_ratio":1.776,"height":563,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB11D_UMVXXXXcDXVXXq6xXFXXXF.jpg?v=1668684406","width":1000},{"alt":null,"id":30940336423130,"position":4,"preview_image":{"aspect_ratio":1.332,"height":751,"width":1000,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1q6fSMVXXXXafaXXXq6xXFXXXV.jpg?v=1668684452"},"aspect_ratio":1.332,"height":751,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1q6fSMVXXXXafaXXXq6xXFXXXV.jpg?v=1668684452","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003ePGYTECH 7.9 9.7 Inch Surrounded Lens Hood Remote Controller Monitor Hood for Tablets dji Phantom 3 4 Pro drone accessoriesPGYTECH 7.9 9.7 Inch Surrounded Lens Hood Remote Controller Monitor Hood for Tablets DJI Phantom 3 4 Pro drone accessories.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eBrand: PGY TECH\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eProduct name: Drone Aviator Hood kit \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eProduct material: High-quality leather\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eApplicable: Phantom Inspire whole series of remote control\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eProduct size and the suitable display screen:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 5.5 -inch: For mobile phones\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 7.9 -inch: Suitable for the mini device and 8 \"small tablet \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e (transmission hole in the middle)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 9.7 -inch: Applicable to the AIR and 9.7-inch large plate hole\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e center (transmission)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eProduct features: Full surrounded, quick-release combination remote hood,\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e Durable, eye shading, prevents dizziness, prevents metering.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eProduct color: Spruce Green and Ivory White.\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}
R 399.00
Quick View
{"id":7846747898074,"title":"Phone Hood for Phantom 3","handle":"hood-phone-for-phantom-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePhone Monitor Hood For DJI Phantom 3\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e Feature:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e 1)Suede PU material for reduced reflection\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 2)quick release mechanism for easy and fast assembly\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 3)Full protection against light reflections\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 4)Increased screen visibility and eye protection\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 5)Compatible with DJI MAVIC and SPARK remote controllers\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003e Product-suitable display screen:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i1.439e6b77zykBdO\"\u003e Adaptable phone screen size ≤162mm*82mm \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e For iPhone 6 \/ 7\u003cbr\u003e For Samsung S6 \/ S6 edge \/ S7 \/S7 edge\u003cbr\u003e For Mi 5 \/ 4 \/ 4C\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003cstrong\u003ePackage: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 1 X PGYTECH Monitor Hood\u003c\/span\u003e\u003c\/div\u003e","published_at":"2022-11-11T09:50:57+02:00","created_at":"2022-11-11T09:50:57+02:00","vendor":"Phantom 3","type":"Drones","tags":["Phantom 3"],"price":39900,"price_min":39900,"price_max":39900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43470790361306,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DJIIP56","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Phone Hood for Phantom 3","public_title":null,"options":["Default Title"],"price":39900,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/products\/509f6f9a3e2cb4dcfc937fe38fe1027a.jpg?v=1668157312","\/\/gpmodels.co.za\/cdn\/shop\/products\/312vz_yc8XL._AC_SY1000.jpg?v=1668157319"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/products\/509f6f9a3e2cb4dcfc937fe38fe1027a.jpg?v=1668157312","options":["Title"],"media":[{"alt":null,"id":30897318592730,"position":1,"preview_image":{"aspect_ratio":1.0,"height":736,"width":736,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/509f6f9a3e2cb4dcfc937fe38fe1027a.jpg?v=1668157312"},"aspect_ratio":1.0,"height":736,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/509f6f9a3e2cb4dcfc937fe38fe1027a.jpg?v=1668157312","width":736},{"alt":null,"id":30897319215322,"position":2,"preview_image":{"aspect_ratio":1.116,"height":310,"width":346,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/312vz_yc8XL._AC_SY1000.jpg?v=1668157319"},"aspect_ratio":1.116,"height":310,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/312vz_yc8XL._AC_SY1000.jpg?v=1668157319","width":346}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePhone Monitor Hood For DJI Phantom 3\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e Feature:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e 1)Suede PU material for reduced reflection\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 2)quick release mechanism for easy and fast assembly\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 3)Full protection against light reflections\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 4)Increased screen visibility and eye protection\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 5)Compatible with DJI MAVIC and SPARK remote controllers\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003e Product-suitable display screen:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i1.439e6b77zykBdO\"\u003e Adaptable phone screen size ≤162mm*82mm \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e For iPhone 6 \/ 7\u003cbr\u003e For Samsung S6 \/ S6 edge \/ S7 \/S7 edge\u003cbr\u003e For Mi 5 \/ 4 \/ 4C\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003cstrong\u003ePackage: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e 1 X PGYTECH Monitor Hood\u003c\/span\u003e\u003c\/div\u003e"}
R 2,995.00
Quick View
{"id":7845947179226,"title":"GANNET X - ELECTRO-MECHANICAL PAYLOAD RELEASE FOR DJI PHANTOM 3","handle":"gannet-x-electro-mechanical-payload-release-for-dji-phantom-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eFits all Phantom 3’s \u0026amp; 4’s\u003c\/li\u003e\n\u003cli\u003eDesigned not to interfere with your drones VPS sensors. All remain ON, unobstructed and active, no need to move it to the back legs to clear the sensors.\u003c\/li\u003e\n\u003cli\u003eMounts in seconds to your drone with no tools required, no removal of the LEDs lens,\u003c\/li\u003e\n\u003cli\u003eClear from the drone camera including the large P4Pro \u0026amp; Adv camera.\u003c\/li\u003e\n\u003cli\u003eOver 10kg release ability - A Phantom can lift 1.4kg Max, 800g Max recommended bait, more possible but not recommended.\u003c\/li\u003e\n\u003cli\u003eSelectable auto mechanical release or full lock - for the guys that fly amongst the gulls, adding protection against reel jams with emergency bail.\u003c\/li\u003e\n\u003cli\u003eIs fully autonomous and self-sufficient with its own rechargeable battery, charged from an internal charger powered by USB charge lead in under 30min. A single charge can do over 100 drops, Over 2-week stand by if left on (warning this could damage the battery)\u003c\/li\u003e\n\u003cli\u003eNo need to modify your drone in any manner nor do you need to open it,\u003c\/li\u003e\n\u003cli\u003eCentral loading the same as all other Gannets - balancing the load on all 4 motors, this is fundamental to all drones. See WARNING section below for more details.\u003c\/li\u003e\n\u003cli\u003eAll electronics are kept away from the light-bridge antennas and compasses that are located in all 4 the drones legs. Thus ensuring interference-free operation of your drone even at long distances,\u003c\/li\u003e\n\u003cli\u003eIs activated by the front LED lights of your drone which can easily be turned on and off using your C1 or C2 buttons on your drone's remote * . Alternatively, you can set your drone's camera that when you start recording that it automatically switches the lights off, stop the record and the lights are back on.\u003c\/li\u003e\n\u003cli\u003eFastest one handloading of all releases, even while the drone is hovering. With no need for metal\/plastic rings on the Drop-Loop. Designed for 0,25mm to 1,2mm nylon Drop-Loops.\u003c\/li\u003e\n\u003cli\u003eInstant activation from the C1 or C2 button on the drone remote, - full distance range of the drone.\u003c\/li\u003e\n\u003cli\u003eAll 4 flight LED lights remain fully functional and visible (No LED is blocked off), Gannet X can be used in Light or Dark mode (user selectable)\u003c\/li\u003e\n\u003cli\u003eSmallest, most compact and most powerful Gannet to date and the smallest release in the market by a very large margin. Weighing in at only 55g. Weight saved on the release is safety gained for the flight reducing drone power consumption.\u003c\/li\u003e\n\u003cli\u003eHigh-quality injection moulded body with brass release pin. Design and appearance matching that of DJI themselves.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e* excludes Phantom 3 Standard that does not have C1\/2 buttons and needs activation from within the DJI Go App\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWARNINGS\u003c\/b\u003e \u003cb\u003e\u0026amp;\u003c\/b\u003e \u003cb\u003eCONCERNS\u003c\/b\u003e \u003cb\u003eREGARDING\u003c\/b\u003e \u003cb\u003eOTHER\u003c\/b\u003e \u003cb\u003eDESIGNS\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDO NOT disable VPS or Landing Protection, critical systems that protect your drone, camera \u0026amp; gimbal as well as personal and public safety. Other designs that require VPS to be disabled are compromised and should be avoided. For more on VPS and flying over water please see https:\/\/youtu.be\/FihnvkaN83M\u003c\/li\u003e\n\u003cli\u003eSome designs require yanking the line free, the drone IMU does not handle repeated sudden movements well, nor is it good for the drone legs that house the radio antennas and compasses.\u003c\/li\u003e\n\u003cli\u003eSome designs force off-centre loading, to any side, especially the back in order to clear the VPS sensors, this reduces the load-carrying ability by up to 40% if central back and up to 60% if off-centre to back, this dramatically increases drone instability, as individual motors over speed while countering the imbalance resulting in loss of control. These designs that require off centre loading are compromised and should be avoided as having one or two motors overwork and failover water is fatal. These designs make several claims to try to justify loading off centre, these claims are false and designed merely to justify a poor concept.\u003c\/li\u003e\n\u003cli\u003eThere are designs that lift “near” the centre but when they do they interfere with the VPS, these designs have options to clear the sensors but in those positions, they then lift the load totally wrong.\u003c\/li\u003e\n\u003cli\u003eSeveral designs weigh over 100g, any unnecessary weight added to the release is unnecessary power-sapping on the drone, also reducing the max bait load by the equivalent. Every 50g saps approximately 5% more power from the battery 100% of the time the drone is airborne. So in 4 bait drops the drone has lost near 1:30min flight time just because of the heavy release. This can be the difference of making it back to shore or having the drone go for a swim.\u003c\/li\u003e\n\u003cli\u003eWhen using a downrigger clip: The addition of the downrigger clip requires VPS to be disabled - Gannet takes no responsibility for any losses that may be sustained as a result of disabling VPS. Gannet also does not recommend using this method (downrigger clip) for everyday use, yanking the line free, puts unnecessary stress and shock on the drone legs, which houses the radio antennas and compasses and may also negatively affect the drone’s very sensitive IMU. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGannet X (CARBON BLACK)\u003c\/li\u003e\n\u003cli\u003ePhantom 3 sensor adapter.\u003c\/li\u003e\n\u003cli\u003ePhantom 4 sensor adapter \u003c\/li\u003e\n\u003cli\u003eUSB Charge lead.\u003c\/li\u003e\n\u003cli\u003e2 off additional spare body securing bands.\u003c\/li\u003e\n\u003cli\u003e1 off Phantom 3 sensor mounting band.\u003c\/li\u003e\n\u003cli\u003eInstruction leaflet.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-11-10T11:29:32+02:00","created_at":"2022-11-10T11:29:32+02:00","vendor":"Phantom 3","type":"Drones","tags":["Phantom 3"],"price":299500,"price_min":299500,"price_max":299500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43467074666714,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"GANNET X - ELECTRO-MECHANICAL PAYLOAD RELEASE FOR DJI PHANTOM 3","public_title":null,"options":["Default Title"],"price":299500,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/products\/gannet-x-dji-phantom-3-4-payload-bait-release-bait-dropper-drone-fishing_grande_1_1500x1500_grande_46841542-5220-43ed-8d76-1c498062d6d1.jpg?v=1668073126"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/products\/gannet-x-dji-phantom-3-4-payload-bait-release-bait-dropper-drone-fishing_grande_1_1500x1500_grande_46841542-5220-43ed-8d76-1c498062d6d1.jpg?v=1668073126","options":["Title"],"media":[{"alt":null,"id":30890568810714,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/gannet-x-dji-phantom-3-4-payload-bait-release-bait-dropper-drone-fishing_grande_1_1500x1500_grande_46841542-5220-43ed-8d76-1c498062d6d1.jpg?v=1668073126"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/gannet-x-dji-phantom-3-4-payload-bait-release-bait-dropper-drone-fishing_grande_1_1500x1500_grande_46841542-5220-43ed-8d76-1c498062d6d1.jpg?v=1668073126","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eFits all Phantom 3’s \u0026amp; 4’s\u003c\/li\u003e\n\u003cli\u003eDesigned not to interfere with your drones VPS sensors. All remain ON, unobstructed and active, no need to move it to the back legs to clear the sensors.\u003c\/li\u003e\n\u003cli\u003eMounts in seconds to your drone with no tools required, no removal of the LEDs lens,\u003c\/li\u003e\n\u003cli\u003eClear from the drone camera including the large P4Pro \u0026amp; Adv camera.\u003c\/li\u003e\n\u003cli\u003eOver 10kg release ability - A Phantom can lift 1.4kg Max, 800g Max recommended bait, more possible but not recommended.\u003c\/li\u003e\n\u003cli\u003eSelectable auto mechanical release or full lock - for the guys that fly amongst the gulls, adding protection against reel jams with emergency bail.\u003c\/li\u003e\n\u003cli\u003eIs fully autonomous and self-sufficient with its own rechargeable battery, charged from an internal charger powered by USB charge lead in under 30min. A single charge can do over 100 drops, Over 2-week stand by if left on (warning this could damage the battery)\u003c\/li\u003e\n\u003cli\u003eNo need to modify your drone in any manner nor do you need to open it,\u003c\/li\u003e\n\u003cli\u003eCentral loading the same as all other Gannets - balancing the load on all 4 motors, this is fundamental to all drones. See WARNING section below for more details.\u003c\/li\u003e\n\u003cli\u003eAll electronics are kept away from the light-bridge antennas and compasses that are located in all 4 the drones legs. Thus ensuring interference-free operation of your drone even at long distances,\u003c\/li\u003e\n\u003cli\u003eIs activated by the front LED lights of your drone which can easily be turned on and off using your C1 or C2 buttons on your drone's remote * . Alternatively, you can set your drone's camera that when you start recording that it automatically switches the lights off, stop the record and the lights are back on.\u003c\/li\u003e\n\u003cli\u003eFastest one handloading of all releases, even while the drone is hovering. With no need for metal\/plastic rings on the Drop-Loop. Designed for 0,25mm to 1,2mm nylon Drop-Loops.\u003c\/li\u003e\n\u003cli\u003eInstant activation from the C1 or C2 button on the drone remote, - full distance range of the drone.\u003c\/li\u003e\n\u003cli\u003eAll 4 flight LED lights remain fully functional and visible (No LED is blocked off), Gannet X can be used in Light or Dark mode (user selectable)\u003c\/li\u003e\n\u003cli\u003eSmallest, most compact and most powerful Gannet to date and the smallest release in the market by a very large margin. Weighing in at only 55g. Weight saved on the release is safety gained for the flight reducing drone power consumption.\u003c\/li\u003e\n\u003cli\u003eHigh-quality injection moulded body with brass release pin. Design and appearance matching that of DJI themselves.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e* excludes Phantom 3 Standard that does not have C1\/2 buttons and needs activation from within the DJI Go App\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWARNINGS\u003c\/b\u003e \u003cb\u003e\u0026amp;\u003c\/b\u003e \u003cb\u003eCONCERNS\u003c\/b\u003e \u003cb\u003eREGARDING\u003c\/b\u003e \u003cb\u003eOTHER\u003c\/b\u003e \u003cb\u003eDESIGNS\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDO NOT disable VPS or Landing Protection, critical systems that protect your drone, camera \u0026amp; gimbal as well as personal and public safety. Other designs that require VPS to be disabled are compromised and should be avoided. For more on VPS and flying over water please see https:\/\/youtu.be\/FihnvkaN83M\u003c\/li\u003e\n\u003cli\u003eSome designs require yanking the line free, the drone IMU does not handle repeated sudden movements well, nor is it good for the drone legs that house the radio antennas and compasses.\u003c\/li\u003e\n\u003cli\u003eSome designs force off-centre loading, to any side, especially the back in order to clear the VPS sensors, this reduces the load-carrying ability by up to 40% if central back and up to 60% if off-centre to back, this dramatically increases drone instability, as individual motors over speed while countering the imbalance resulting in loss of control. These designs that require off centre loading are compromised and should be avoided as having one or two motors overwork and failover water is fatal. These designs make several claims to try to justify loading off centre, these claims are false and designed merely to justify a poor concept.\u003c\/li\u003e\n\u003cli\u003eThere are designs that lift “near” the centre but when they do they interfere with the VPS, these designs have options to clear the sensors but in those positions, they then lift the load totally wrong.\u003c\/li\u003e\n\u003cli\u003eSeveral designs weigh over 100g, any unnecessary weight added to the release is unnecessary power-sapping on the drone, also reducing the max bait load by the equivalent. Every 50g saps approximately 5% more power from the battery 100% of the time the drone is airborne. So in 4 bait drops the drone has lost near 1:30min flight time just because of the heavy release. This can be the difference of making it back to shore or having the drone go for a swim.\u003c\/li\u003e\n\u003cli\u003eWhen using a downrigger clip: The addition of the downrigger clip requires VPS to be disabled - Gannet takes no responsibility for any losses that may be sustained as a result of disabling VPS. Gannet also does not recommend using this method (downrigger clip) for everyday use, yanking the line free, puts unnecessary stress and shock on the drone legs, which houses the radio antennas and compasses and may also negatively affect the drone’s very sensitive IMU. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGannet X (CARBON BLACK)\u003c\/li\u003e\n\u003cli\u003ePhantom 3 sensor adapter.\u003c\/li\u003e\n\u003cli\u003ePhantom 4 sensor adapter \u003c\/li\u003e\n\u003cli\u003eUSB Charge lead.\u003c\/li\u003e\n\u003cli\u003e2 off additional spare body securing bands.\u003c\/li\u003e\n\u003cli\u003e1 off Phantom 3 sensor mounting band.\u003c\/li\u003e\n\u003cli\u003eInstruction leaflet.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e"}
R 995.00
Quick View
{"id":7842788835546,"title":"DJI Phantom Range Extender \/ Booster for DJI Phantom 4, DJI Phantom 3","handle":"dji-phantom-range-extender-booster-for-dji-phantom-4-dji-phantom-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eI’m sure you’ve been there before: Flying your drone when you hear the infamous beeping. Warning you that you are almost out of range. For some reason, this always seems to happen to me just as I’m getting close to the perfect shot.\u003c\/p\u003e\n\u003cp\u003eI don’t know about you, but losing connection is the 2nd to the last thing I want to do while flying my drone. Losing my drone would rank #1!\u003c\/p\u003e\n\u003cp\u003eThere are different views on the effectiveness of purchasing radio antenna boosters. However, a majority of people agree that these definitely improve the distance, especially the video signal. For the small price you’ll pay, it’s a small risk compared to the huge investment you have made in your\u003cspan\u003e Phantom 3\u0026amp;4 DJI DRONE.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor example, Hokie115 has benchmarked the flying distance repeatedly on the same flight path, with and without the SKYREAT DJI Phantom Range Extender. Without the radio antenna extender, he gets about a mile out before the video starts to drop out. With the range booster, he can easily travel over 3 miles without any loss of video or a reduction in the signal!\u003c\/p\u003e\n\u003cp\u003eAt this point, you’re basically risking whether or not you have enough battery life to make it back.\u003c\/p\u003e\n\u003cp\u003eIt’s important to note that once you start to get past a mile, you need to make sure you keep the transmitter pointed at your drone. If you turn away, it may lose connection.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-11-07T11:34:12+02:00","created_at":"2022-11-07T11:34:12+02:00","vendor":"Phantom 3","type":"Drones","tags":["Phantom 3"],"price":99500,"price_min":99500,"price_max":99500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43453543547098,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DJI-TX04","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DJI Phantom Range Extender \/ Booster for DJI Phantom 4, DJI Phantom 3","public_title":null,"options":["Default Title"],"price":99500,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/products\/DJI-Phantom-Range-Extender-Booster-e1463804653575-768x640.jpg?v=1667814411"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/products\/DJI-Phantom-Range-Extender-Booster-e1463804653575-768x640.jpg?v=1667814411","options":["Title"],"media":[{"alt":null,"id":30867663618266,"position":1,"preview_image":{"aspect_ratio":1.2,"height":640,"width":768,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/DJI-Phantom-Range-Extender-Booster-e1463804653575-768x640.jpg?v=1667814411"},"aspect_ratio":1.2,"height":640,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/DJI-Phantom-Range-Extender-Booster-e1463804653575-768x640.jpg?v=1667814411","width":768}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eI’m sure you’ve been there before: Flying your drone when you hear the infamous beeping. Warning you that you are almost out of range. For some reason, this always seems to happen to me just as I’m getting close to the perfect shot.\u003c\/p\u003e\n\u003cp\u003eI don’t know about you, but losing connection is the 2nd to the last thing I want to do while flying my drone. Losing my drone would rank #1!\u003c\/p\u003e\n\u003cp\u003eThere are different views on the effectiveness of purchasing radio antenna boosters. However, a majority of people agree that these definitely improve the distance, especially the video signal. For the small price you’ll pay, it’s a small risk compared to the huge investment you have made in your\u003cspan\u003e Phantom 3\u0026amp;4 DJI DRONE.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor example, Hokie115 has benchmarked the flying distance repeatedly on the same flight path, with and without the SKYREAT DJI Phantom Range Extender. Without the radio antenna extender, he gets about a mile out before the video starts to drop out. With the range booster, he can easily travel over 3 miles without any loss of video or a reduction in the signal!\u003c\/p\u003e\n\u003cp\u003eAt this point, you’re basically risking whether or not you have enough battery life to make it back.\u003c\/p\u003e\n\u003cp\u003eIt’s important to note that once you start to get past a mile, you need to make sure you keep the transmitter pointed at your drone. If you turn away, it may lose connection.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
R 195.00
Quick View
{"id":7842765373658,"title":"Camera Glass Protective Film for DJI Phantom 3\u00264","handle":"camera-glass-protective-film-for-dji-phantom-3-4","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e-Advanced Glass Material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-Use for Phantom4\/3 Camera Protection Film.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-Perfect protection for your camera lens.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e-Edge comes with glue Easy installation.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e-Fixation does not affect the original lens cap.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e-Tickness:0.6mm, Ultra Thin.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003ePACKAGE INCLUDES: \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e-1x UV glass protection film.\u003c\/span\u003e\u003c\/div\u003e","published_at":"2022-11-07T11:08:45+02:00","created_at":"2022-11-07T11:08:45+02:00","vendor":"Phantom 3","type":"Drones","tags":["Phantom 3"],"price":19500,"price_min":19500,"price_max":19500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43453479911642,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DJIP4\/3 PF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Camera Glass Protective Film for DJI Phantom 3\u00264","public_title":null,"options":["Default Title"],"price":19500,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/products\/51fr1aejcXL.SS700.jpg?v=1667812499","\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1x3_xMpXXXXaUXXXXq6xXFXXXk.jpg?v=1667812499"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/products\/51fr1aejcXL.SS700.jpg?v=1667812499","options":["Title"],"media":[{"alt":null,"id":30867483918554,"position":1,"preview_image":{"aspect_ratio":1.0,"height":700,"width":700,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/51fr1aejcXL.SS700.jpg?v=1667812499"},"aspect_ratio":1.0,"height":700,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/51fr1aejcXL.SS700.jpg?v=1667812499","width":700},{"alt":null,"id":30867466780890,"position":2,"preview_image":{"aspect_ratio":0.334,"height":2188,"width":730,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1x3_xMpXXXXaUXXXXq6xXFXXXk.jpg?v=1667812499"},"aspect_ratio":0.334,"height":2188,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1x3_xMpXXXXaUXXXXq6xXFXXXk.jpg?v=1667812499","width":730}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e-Advanced Glass Material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-Use for Phantom4\/3 Camera Protection Film.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e-Perfect protection for your camera lens.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e-Edge comes with glue Easy installation.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e-Fixation does not affect the original lens cap.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e-Tickness:0.6mm, Ultra Thin.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003ePACKAGE INCLUDES: \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e-1x UV glass protection film.\u003c\/span\u003e\u003c\/div\u003e"}
R 399.00
Quick View
{"id":7842738733274,"title":"Tablet\/smartphone Drones Universal Remote Control - Dji Phantom 4 (4\/pro) Phantom 3 (st\/adv\/pro) Inspire..!","handle":"tablet-smartphone-drones-universal-remote-control-dji-phantom-4-4-pro-phantom-3-st-adv-pro-inspire","description":"\u003ch5\u003eDescription\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h5\u003e\n\u003ch1 class=\"ui-pdp-title\"\u003e\u003c\/h1\u003e\n\u003ctable height=\"5\" width=\"551\" class=\"andes-table\"\u003e\n\u003ctbody class=\"andes-table__body\"\u003e\n\u003ctr class=\"andes-table__row\" rowspan=\"\"\u003e\n\u003cth class=\"andes-table__header andes-table__header--left ui-pdp-specs__table__column ui-pdp-specs__table__column-title\"\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd class=\"andes-table__column andes-table__column--left ui-pdp-specs__table__column\"\u003e\u003cspan class=\"andes-table__column--value\"\u003e\u003cspan\u003eSunnylife\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"andes-table__row\" rowspan=\"\"\u003e\n\u003cth class=\"andes-table__header andes-table__header--left ui-pdp-specs__table__column ui-pdp-specs__table__column-title\"\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd class=\"andes-table__column andes-table__column--left ui-pdp-specs__table__column\"\u003e\u003cspan class=\"andes-table__column--value\"\u003e\u003cspan\u003eDJI-ZJ008\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSupport for smartphone and tablet to be used with the radio control of the DJI Phantom 4 (4\/Pro) Phantom 3 (Standard\/Advanced\/Professional) and Inspire drones, product adjustable from 13cm to 18.5cm.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eStably connect your tablet or smartphone together with the remote control, without interfering with the joystick operation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eEasy installation.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncluded items:\u003cbr\u003e1 x Tablet\/Smartphone Stand Remote Control Drones DJI Phantom 4 (4\/Pro) Phantom 3 (Standard\/Advanced\/Professional) Inspire\u003cbr\u003e\u003cbr\u003eTablet\/smartphone\/radio remote control not included.\u003cbr\u003eMerely illustrative images.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2022-11-07T10:52:04+02:00","created_at":"2022-11-07T10:52:04+02:00","vendor":"Phantom 3","type":"Drones","tags":["Phantom 3"],"price":39900,"price_min":39900,"price_max":39900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43453435871450,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DJI-ZJ008","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tablet\/smartphone Drones Universal Remote Control - Dji Phantom 4 (4\/pro) Phantom 3 (st\/adv\/pro) Inspire..!","public_title":null,"options":["Default Title"],"price":39900,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/products\/download_38_b0894b5c-7b2b-449d-bff6-3e09258b1b5b.jpg?v=1667811183","\/\/gpmodels.co.za\/cdn\/shop\/products\/D_NQ_NP_791496-MLM31237663981_062019-O_ff92812f-43e1-4c01-84fe-8f23231e350f.jpg?v=1667811190"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/products\/download_38_b0894b5c-7b2b-449d-bff6-3e09258b1b5b.jpg?v=1667811183","options":["Title"],"media":[{"alt":null,"id":30867303956698,"position":1,"preview_image":{"aspect_ratio":1.0,"height":225,"width":225,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/download_38_b0894b5c-7b2b-449d-bff6-3e09258b1b5b.jpg?v=1667811183"},"aspect_ratio":1.0,"height":225,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/download_38_b0894b5c-7b2b-449d-bff6-3e09258b1b5b.jpg?v=1667811183","width":225},{"alt":null,"id":30867306348762,"position":2,"preview_image":{"aspect_ratio":0.955,"height":377,"width":360,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/D_NQ_NP_791496-MLM31237663981_062019-O_ff92812f-43e1-4c01-84fe-8f23231e350f.jpg?v=1667811190"},"aspect_ratio":0.955,"height":377,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/D_NQ_NP_791496-MLM31237663981_062019-O_ff92812f-43e1-4c01-84fe-8f23231e350f.jpg?v=1667811190","width":360}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h5\u003e\n\u003ch1 class=\"ui-pdp-title\"\u003e\u003c\/h1\u003e\n\u003ctable height=\"5\" width=\"551\" class=\"andes-table\"\u003e\n\u003ctbody class=\"andes-table__body\"\u003e\n\u003ctr class=\"andes-table__row\" rowspan=\"\"\u003e\n\u003cth class=\"andes-table__header andes-table__header--left ui-pdp-specs__table__column ui-pdp-specs__table__column-title\"\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd class=\"andes-table__column andes-table__column--left ui-pdp-specs__table__column\"\u003e\u003cspan class=\"andes-table__column--value\"\u003e\u003cspan\u003eSunnylife\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"andes-table__row\" rowspan=\"\"\u003e\n\u003cth class=\"andes-table__header andes-table__header--left ui-pdp-specs__table__column ui-pdp-specs__table__column-title\"\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/th\u003e\n\u003ctd class=\"andes-table__column andes-table__column--left ui-pdp-specs__table__column\"\u003e\u003cspan class=\"andes-table__column--value\"\u003e\u003cspan\u003eDJI-ZJ008\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSupport for smartphone and tablet to be used with the radio control of the DJI Phantom 4 (4\/Pro) Phantom 3 (Standard\/Advanced\/Professional) and Inspire drones, product adjustable from 13cm to 18.5cm.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eStably connect your tablet or smartphone together with the remote control, without interfering with the joystick operation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eEasy installation.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncluded items:\u003cbr\u003e1 x Tablet\/Smartphone Stand Remote Control Drones DJI Phantom 4 (4\/Pro) Phantom 3 (Standard\/Advanced\/Professional) Inspire\u003cbr\u003e\u003cbr\u003eTablet\/smartphone\/radio remote control not included.\u003cbr\u003eMerely illustrative images.\u003c\/span\u003e\u003c\/p\u003e"}
R 325.00
Quick View
{"id":7840732381402,"title":"Sunnylife DJI Phantom 3 - Standard Professional Advanced Camera Lens Filter ND4","handle":"sunnylife-dji-phantom-3-standard-professional-advanced-camera-lens-filters-nd4","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFor ND4 Lens filter: For Phantom 3 \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTo enable slow shutter speeds to be used, especially with fast films, to record movement in subjects such as waterfalls, clouds, cars, seas, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTo decrease depth of field by allowing wider apertures to be used, which helps separate subjects from their background.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTo decrease the effective ISO of high-speed film and allow it to be used outdoors in blight situations.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTo allow cine and video cameras (which have fixed shutter speeds) to film subjects such as snow, sand, or other bright scenes which would normally cause over-exposure.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFor UV CPL Lens Filter:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA UV filter is used to reduce UV rays from entering the lens and striking the film. Modern lenses often have UV protection built into them as well as digital sensors, however, UV filters are commonly used to help protect the surface of the lens from scratches, smudges, dirt, and other hazards.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA polarizer is different than most filters in that it is composed of two pieces of glass, mounted independently inside a round frame so that one can be rotated relative to the other. As it is rotated, it increasingly cuts out glare and haze. With an SLR, you can actually observe this change through the viewfinder. Polarizers reduce glare from water, glass, or any non-metallic surface. You can also use a polarizer filter to darken blue skies.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2022-11-04T16:15:10+02:00","created_at":"2022-11-04T16:15:10+02:00","vendor":"Phantom 3","type":"Drones","tags":["Phantom 3"],"price":32500,"price_min":32500,"price_max":32500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43444764115162,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DJI-F1-05","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sunnylife DJI Phantom 3 - Standard Professional Advanced Camera Lens Filter ND4","public_title":null,"options":["Default Title"],"price":32500,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1XhzGpeuSBuNjSsziq6zq8pXa5.jpg?v=1667571878"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1XhzGpeuSBuNjSsziq6zq8pXa5.jpg?v=1667571878","options":["Title"],"media":[{"alt":null,"id":30850923462874,"position":1,"preview_image":{"aspect_ratio":1.0,"height":900,"width":900,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1XhzGpeuSBuNjSsziq6zq8pXa5.jpg?v=1667571878"},"aspect_ratio":1.0,"height":900,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/HTB1XhzGpeuSBuNjSsziq6zq8pXa5.jpg?v=1667571878","width":900}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFor ND4 Lens filter: For Phantom 3 \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTo enable slow shutter speeds to be used, especially with fast films, to record movement in subjects such as waterfalls, clouds, cars, seas, etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTo decrease depth of field by allowing wider apertures to be used, which helps separate subjects from their background.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTo decrease the effective ISO of high-speed film and allow it to be used outdoors in blight situations.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTo allow cine and video cameras (which have fixed shutter speeds) to film subjects such as snow, sand, or other bright scenes which would normally cause over-exposure.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFor UV CPL Lens Filter:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA UV filter is used to reduce UV rays from entering the lens and striking the film. Modern lenses often have UV protection built into them as well as digital sensors, however, UV filters are commonly used to help protect the surface of the lens from scratches, smudges, dirt, and other hazards.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA polarizer is different than most filters in that it is composed of two pieces of glass, mounted independently inside a round frame so that one can be rotated relative to the other. As it is rotated, it increasingly cuts out glare and haze. With an SLR, you can actually observe this change through the viewfinder. Polarizers reduce glare from water, glass, or any non-metallic surface. You can also use a polarizer filter to darken blue skies.\u003c\/span\u003e\u003c\/p\u003e"}
