1/24 PORSCHE 911 CARRERA GT3
About the Porsche 911 GT3
Since its debut in 1963, the epoch-making Porsche 911 has captivated generations of sports car enthusiasts. Over the years, various models of the 911 have been released, including the 1998 Le Mans-winning 911 GT1. In 1999, the "heart" of that automotive masterpiece, the water-cooled flat-six engine, was inherited by the Porsche 911 GT3. The brainchildren behind that machine are Porsche's development engineers in Weissach, who imbued it with superior agility and handling, without compromising active safety. Capable of accelerating to 100km/h in a mere 4.8 seconds, and with a top speed of 302km/h, the GT3 achieved a new record for production cars when it completed a lap on the northern circuit of Nuerburgring in only 7.56 minutes. The exterior appearance of the GT3 remains true to that of its predecessors, but features a new rear end, discreet side-sills, fixed rear wing, red brake calipers and sporty 18-inch light-alloy wheels. Compared with the 911 Carrera, the four-piston aluminum fixed monobloc brake calipers are larger and sturdier than before, and tightly grip the perforated brake discs. The GT3 cockpit is true reflection of its performance. It features leather-covered bucket seats, which ensure not only ample side support, but also comfort on long journeys and provide about 20kg of weight savings. And since the entire rear-seat section of the car has been dropped, the overall weight of the GT3 was reduced by another 8kg-a true benefit for a sports car of this performance level.
Tamiya has recreated this epoch-making sports car in 1/24 scale. The intricate engine is visible when model is viewed from below. The upper surface features a four part rear-wing construction, enhancing the sophistication of the body design. Kit also comes with the Porsche emblem, authentically recreated as a metal transfer. The inside of the detailed cockpit includes a carpet seat for the floor. Glossy metallic parts are used on the wheels, headlight reflectors, door mirrors and muffler.
Model Specifications:
- 1/24 scale, overall length: 187.5mm, overall width: 76mm.
- Intrepid form of the GT3 perfectly captured as assembly model.
- "Two-seater" cockpit interior authentically recreated.
- Undersurface of chassis abounds with detail.
- Pirelli P-Zero tires of solid rubber add to the realism of this irresistible speedster.
- Cockpit interior "GT3" emblem also included as a metal transfer mark.
Suggested Paint Colors
TS-14 - Black
TS-17 - Aluminum Silver
TS-26 - Pure White
TS-47 - Chrome Yellow
TS-8 - Italian Red
X-11 - Chrome Silver
X-18 - Semi Gloss Black
X-2 - White
X-26 - Clear Orange
X-27 - Clear Red
X-7 - Red
XF-16 - Flat Aluminum
Since its debut in 1963, the epoch-making Porsche 911 has captivated generations of sports car enthusiasts. Over the years, various models of the 911 have been released, including the 1998 Le Mans-winning 911 GT1. In 1999, the "heart" of that automotive masterpiece, the water-cooled flat-six engine, was inherited by the Porsche 911 GT3. The brainchildren behind that machine are Porsche's development engineers in Weissach, who imbued it with superior agility and handling, without compromising active safety. Capable of accelerating to 100km/h in a mere 4.8 seconds, and with a top speed of 302km/h, the GT3 achieved a new record for production cars when it completed a lap on the northern circuit of Nuerburgring in only 7.56 minutes. The exterior appearance of the GT3 remains true to that of its predecessors, but features a new rear end, discreet side-sills, fixed rear wing, red brake calipers and sporty 18-inch light-alloy wheels. Compared with the 911 Carrera, the four-piston aluminum fixed monobloc brake calipers are larger and sturdier than before, and tightly grip the perforated brake discs. The GT3 cockpit is true reflection of its performance. It features leather-covered bucket seats, which ensure not only ample side support, but also comfort on long journeys and provide about 20kg of weight savings. And since the entire rear-seat section of the car has been dropped, the overall weight of the GT3 was reduced by another 8kg-a true benefit for a sports car of this performance level.
Tamiya has recreated this epoch-making sports car in 1/24 scale. The intricate engine is visible when model is viewed from below. The upper surface features a four part rear-wing construction, enhancing the sophistication of the body design. Kit also comes with the Porsche emblem, authentically recreated as a metal transfer. The inside of the detailed cockpit includes a carpet seat for the floor. Glossy metallic parts are used on the wheels, headlight reflectors, door mirrors and muffler.
Model Specifications:
- 1/24 scale, overall length: 187.5mm, overall width: 76mm.
- Intrepid form of the GT3 perfectly captured as assembly model.
- "Two-seater" cockpit interior authentically recreated.
- Undersurface of chassis abounds with detail.
- Pirelli P-Zero tires of solid rubber add to the realism of this irresistible speedster.
- Cockpit interior "GT3" emblem also included as a metal transfer mark.
Suggested Paint Colors
TS-14 - Black
TS-17 - Aluminum Silver
TS-26 - Pure White
TS-47 - Chrome Yellow
TS-8 - Italian Red
X-11 - Chrome Silver
X-18 - Semi Gloss Black
X-2 - White
X-26 - Clear Orange
X-27 - Clear Red
X-7 - Red
XF-16 - Flat Aluminum
Related Products
R 2,795.00
Quick View
{"id":2368860061781,"title":"Tamiya - R\/C Porsche 911 Carrera (TT02)","handle":"r-c-porsche-911-carrera-tt02","description":"\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThe Porsche 911 Carrera RSR joins the Tamiya TT-02 chassis touring car entry level line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in automotive enthusiast's hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTamiya has faithfully reproduced this sleek racing machine in 1\/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R\/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R\/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecification\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eScale : 1\/10\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eConstruction type : assembly kit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTerrain use : on-road\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrive-train : 4WD\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrive type : gearbox\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrive line : dog bone\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDifferential type : gear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSuspension : fully independent double wishbone\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSteering mechanism : bell-crank\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShock damper : friction damper\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShock damper material : plastic\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTire type : rubber\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTire tread : radial\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBody material : Polycarbonate\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eChassis material : plastic\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED Light buckets : no\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED lights : no\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMotor : 540-brushed type\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBearings : plastic bushing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable camber : fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable toe angles : front only\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable ground clearance : yes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable gear ratio : yes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable wheelbase : yes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable track width : yes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable shock angle : yes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 1 : Easy to build entry level kit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 2 : Includes window masking seal for easy painting\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 3 : Highly detailed body with vinyl stickers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 4 : Symmetrical suspension components\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 5 : Bevelled main chassis for improved cornering clearance\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 6 : Brake disc shaped wheel hubs\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 7 : Compatible with 380-size motors\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 8 : Battery compartment compatible with square shaped batteries\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 9 : Separate parts are included to depict side mirror.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 10 : Includes RS-540 Torque-Tuned Motor\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires A : 2-channel radio gear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires B : 7.2 battery \u0026amp; charger\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires C : polycarbonate paint\u003c\/span\u003e\n\u003c\/div\u003e","published_at":"2018-09-05T15:45:09+02:00","created_at":"2019-01-11T16:14:55+02:00","vendor":"TAMIYA","type":"RC Car","tags":["Tamiya","tamiya rc","tamiya rc homepage","tamiya slider"],"price":279500,"price_min":279500,"price_max":279500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":21270971023445,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAM58571","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tamiya - R\/C Porsche 911 Carrera (TT02)","public_title":null,"options":["Default Title"],"price":279500,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/products\/58571_02.jpg?v=1673437026","\/\/gpmodels.co.za\/cdn\/shop\/products\/58571_03.jpg?v=1673437026"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/products\/58571_02.jpg?v=1673437026","options":["Title"],"media":[{"alt":null,"id":31409302143194,"position":1,"preview_image":{"aspect_ratio":1.6,"height":400,"width":640,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/58571_02.jpg?v=1673437026"},"aspect_ratio":1.6,"height":400,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/58571_02.jpg?v=1673437026","width":640},{"alt":null,"id":31409302241498,"position":2,"preview_image":{"aspect_ratio":1.6,"height":400,"width":640,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/58571_03.jpg?v=1673437026"},"aspect_ratio":1.6,"height":400,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/58571_03.jpg?v=1673437026","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThe Porsche 911 Carrera RSR joins the Tamiya TT-02 chassis touring car entry level line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in automotive enthusiast's hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTamiya has faithfully reproduced this sleek racing machine in 1\/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R\/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R\/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecification\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eScale : 1\/10\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eConstruction type : assembly kit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTerrain use : on-road\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrive-train : 4WD\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrive type : gearbox\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrive line : dog bone\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDifferential type : gear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSuspension : fully independent double wishbone\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSteering mechanism : bell-crank\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShock damper : friction damper\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShock damper material : plastic\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTire type : rubber\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTire tread : radial\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBody material : Polycarbonate\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eChassis material : plastic\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED Light buckets : no\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED lights : no\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMotor : 540-brushed type\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBearings : plastic bushing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable camber : fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable toe angles : front only\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable ground clearance : yes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable gear ratio : yes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable wheelbase : yes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable track width : yes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable shock angle : yes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 1 : Easy to build entry level kit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 2 : Includes window masking seal for easy painting\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 3 : Highly detailed body with vinyl stickers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 4 : Symmetrical suspension components\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 5 : Bevelled main chassis for improved cornering clearance\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 6 : Brake disc shaped wheel hubs\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 7 : Compatible with 380-size motors\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 8 : Battery compartment compatible with square shaped batteries\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 9 : Separate parts are included to depict side mirror.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 10 : Includes RS-540 Torque-Tuned Motor\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires A : 2-channel radio gear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires B : 7.2 battery \u0026amp; charger\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires C : polycarbonate paint\u003c\/span\u003e\n\u003c\/div\u003e"}
Quick View
{"id":8011961270490,"title":"R\/C 1\/10 SUBARU IMPREZA MONTE CARLO 1999 (TT02)","handle":"r-c-1-10-subaru-impreza-monte-carlo-1999-tt02","description":"\u003ch5\u003eDESCRIPTION\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe TT-02 chassis line-up is Tamiya's entry-level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance, and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe TT-02 chassis incorporates many features to make it easy for the new R\/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed have been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R\/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the car's speed and performance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eScale: 1\/10\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConstruction type: Assembly kit\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTerrain use: Multi-Purpose\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrive-train: 4WD\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrive Type: Gearbox\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrive line: Dog bone\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDifferential type: Gear\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSuspension: Fully independent double wishbone\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSteering mechanism: Bell-crank\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eShock damper: Friction damper\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eShock damper material: Plastic\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTire type: Rubber\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTire tread: Rally block\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBody material: Polycarbonate\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eChassis material: Plastic\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLED Light buckets: No\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLED lights: No\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMotor: 540-brushed type\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBearings: Plastic bushing\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable camber: Fixed\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable toe angles: Front only\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable ground clearance: Yes\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable gear ratio: Yes\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable wheelbase: Fixed\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable track width: Fixed\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable shock angle: Fixed\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 1: Torque-tuned motor is included!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 2: The classic form of the car is recreated in polycarbonate, with separately-molded side mirrors and rear wing parts.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 3: The TT-02 chassis features a shaft-driven 4WD system that offers easy handling and great customization.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 4: Stickers are included to recreate the markings on the car, as are window masking stickers for use when painting.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 5: 16-spoke gold color molded wheels are paired with rally block tires (Item 50476).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 6: A wide range of option parts is available to tune the TT-02 chassis.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRequires A: 2-channel radio gear\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRequires B: 7.2 battery \u0026amp; charger\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRequires C: Polycarbonate paint\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2023-06-26T16:05:49+02:00","created_at":"2023-06-26T16:05:49+02:00","vendor":"TAMIYA","type":"RC Car","tags":["Tamiya","tamiya rc"],"price":239500,"price_min":239500,"price_max":239500,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43974212583642,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAM58631","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"R\/C 1\/10 SUBARU IMPREZA MONTE CARLO 1999 (TT02)","public_title":null,"options":["Default Title"],"price":239500,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/files\/58631.jpg?v=1687788441"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/files\/58631.jpg?v=1687788441","options":["Title"],"media":[{"alt":null,"id":32399861711066,"position":1,"preview_image":{"aspect_ratio":1.6,"height":400,"width":640,"src":"\/\/gpmodels.co.za\/cdn\/shop\/files\/58631.jpg?v=1687788441"},"aspect_ratio":1.6,"height":400,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/files\/58631.jpg?v=1687788441","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDESCRIPTION\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe TT-02 chassis line-up is Tamiya's entry-level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance, and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe TT-02 chassis incorporates many features to make it easy for the new R\/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed have been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R\/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the car's speed and performance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eScale: 1\/10\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConstruction type: Assembly kit\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTerrain use: Multi-Purpose\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrive-train: 4WD\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrive Type: Gearbox\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDrive line: Dog bone\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDifferential type: Gear\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSuspension: Fully independent double wishbone\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSteering mechanism: Bell-crank\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eShock damper: Friction damper\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eShock damper material: Plastic\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTire type: Rubber\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTire tread: Rally block\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBody material: Polycarbonate\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eChassis material: Plastic\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLED Light buckets: No\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLED lights: No\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMotor: 540-brushed type\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBearings: Plastic bushing\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable camber: Fixed\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable toe angles: Front only\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable ground clearance: Yes\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable gear ratio: Yes\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable wheelbase: Fixed\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable track width: Fixed\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable shock angle: Fixed\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 1: Torque-tuned motor is included!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 2: The classic form of the car is recreated in polycarbonate, with separately-molded side mirrors and rear wing parts.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 3: The TT-02 chassis features a shaft-driven 4WD system that offers easy handling and great customization.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 4: Stickers are included to recreate the markings on the car, as are window masking stickers for use when painting.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 5: 16-spoke gold color molded wheels are paired with rally block tires (Item 50476).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecial feature 6: A wide range of option parts is available to tune the TT-02 chassis.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRequires A: 2-channel radio gear\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRequires B: 7.2 battery \u0026amp; charger\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRequires C: Polycarbonate paint\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e"}
R 2,295.00
Quick View
{"id":1378486222933,"title":"TAMIYA R\/C - 1\/10 The Grasshopper","handle":"r-c-1-10-the-grasshopper","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R\/C veterans alike, while separately sold option parts can be used to enhance the model.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eScale: 1\/10\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eConstruction type: Assembly kit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTerrain use: Off-Road\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrivetrain: 2WD\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrive Type: Gearbox\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDriveline: Solid axle\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDifferential type: Gear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSuspension: Independent front\/solid axle rear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSteering mechanism: Direct servo\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShock damper: Friction damper\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShock damper material: Plastic\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTire type: Rubber\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTire tread: Grooved front\/pin spike rear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBody material: ABS Plastic\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eChassis material: Plastic\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED Light buckets: No\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED lights: No\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMotor: 380-brushed type\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBearings: Plastic bushing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable camber: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable toe angles: Front only\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable ground clearance: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable gear ratio: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable wheelbase: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable track width: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable shock angle: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 1: Length: 400mm, width: 221mm, height: 139mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 2: The Grasshopper II body is molded in durable polystyrene resin, and has a driver figure for attachment.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 3: Features a rugged ABS resin bathtub chassis.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 4: Front swing axle and rear rolling rigid suspension setups are actuated by coil-sprung friction dampers.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 5: Fully enclosed rear gearbox contains a differential gear to aid smooth cornering.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 6: Front ribbed tires give great straight-ahead grip, and rear spike tires provide powerful drive. They are matched with 8-spoke one-piece lightweight wheels.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 7: Compatible with tune-up parts such as standard Type 540 motors (requires nine 1150 ball bearings \u0026amp; one 850 ball bearing) and CVA mini oil dampers.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires A: 2-channel radio gear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires B: 7.2 battery \u0026amp; charger\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires C: TS plastic model paint\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-10-11T16:39:01+02:00","created_at":"2018-10-10T12:38:45+02:00","vendor":"Tamiya","type":"RC Car","tags":["tamiya rc"],"price":229500,"price_min":229500,"price_max":229500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12665766379605,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAM58643","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TAMIYA R\/C - 1\/10 The Grasshopper","public_title":null,"options":["Default Title"],"price":229500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/products\/58346_1_2.jpg?v=1539167946","\/\/gpmodels.co.za\/cdn\/shop\/products\/58643_03.jpg?v=1673438191"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/products\/58346_1_2.jpg?v=1539167946","options":["Title"],"media":[{"alt":null,"id":875355766869,"position":1,"preview_image":{"aspect_ratio":1.973,"height":376,"width":742,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/58346_1_2.jpg?v=1539167946"},"aspect_ratio":1.973,"height":376,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/58346_1_2.jpg?v=1539167946","width":742},{"alt":null,"id":31409412047066,"position":2,"preview_image":{"aspect_ratio":1.6,"height":400,"width":640,"src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/58643_03.jpg?v=1673438191"},"aspect_ratio":1.6,"height":400,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/products\/58643_03.jpg?v=1673438191","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R\/C veterans alike, while separately sold option parts can be used to enhance the model.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eScale: 1\/10\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eConstruction type: Assembly kit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTerrain use: Off-Road\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrivetrain: 2WD\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrive Type: Gearbox\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDriveline: Solid axle\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDifferential type: Gear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSuspension: Independent front\/solid axle rear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSteering mechanism: Direct servo\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShock damper: Friction damper\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShock damper material: Plastic\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTire type: Rubber\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTire tread: Grooved front\/pin spike rear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBody material: ABS Plastic\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eChassis material: Plastic\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED Light buckets: No\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED lights: No\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMotor: 380-brushed type\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBearings: Plastic bushing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable camber: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable toe angles: Front only\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable ground clearance: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable gear ratio: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable wheelbase: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable track width: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable shock angle: Fixed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 1: Length: 400mm, width: 221mm, height: 139mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 2: The Grasshopper II body is molded in durable polystyrene resin, and has a driver figure for attachment.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 3: Features a rugged ABS resin bathtub chassis.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 4: Front swing axle and rear rolling rigid suspension setups are actuated by coil-sprung friction dampers.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 5: Fully enclosed rear gearbox contains a differential gear to aid smooth cornering.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 6: Front ribbed tires give great straight-ahead grip, and rear spike tires provide powerful drive. They are matched with 8-spoke one-piece lightweight wheels.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecial feature 7: Compatible with tune-up parts such as standard Type 540 motors (requires nine 1150 ball bearings \u0026amp; one 850 ball bearing) and CVA mini oil dampers.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires A: 2-channel radio gear\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires B: 7.2 battery \u0026amp; charger\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRequires C: TS plastic model paint\u003c\/span\u003e\u003c\/p\u003e"}
R 5,895.00
Quick View
{"id":8050599231706,"title":"TAMIYA - TAM 56301 KING HAULER 1\/14 RC KIT","handle":"tamiya-tam-56301-king-hauler-1-14-rc-kit","description":"\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe Mighty King Hauler resembles the classic conventional American tractor truck. Powered by a 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with a leaf spring and shocks. The metal C-Channel ladder frame keeps the power to the pavement.\u003c\/p\u003e\n\u003ch4\u003ePLEASE NOTE: This is an assembly kit and requires a radio, servo, battery, charger, and paint to complete.\u003c\/h4\u003e\n\u003c\/div\u003e","published_at":"2023-09-05T09:40:13+02:00","created_at":"2023-09-05T09:40:13+02:00","vendor":"TAMIYA","type":"RC Car","tags":["NSA2023","Tamiya","tamiya rc","tamiya rc homepage","tamiya slider"],"price":589500,"price_min":589500,"price_max":589500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44075836768474,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAM56301","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"TAMIYA - TAM 56301 KING HAULER 1\/14 RC KIT","public_title":null,"options":["Default Title"],"price":589500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/files\/tamiya-tam-56301-king-hauler-1-14-rc-kit.jpg?v=1693900095"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/files\/tamiya-tam-56301-king-hauler-1-14-rc-kit.jpg?v=1693900095","options":["Title"],"media":[{"alt":null,"id":32690716377306,"position":1,"preview_image":{"aspect_ratio":1.196,"height":718,"width":859,"src":"\/\/gpmodels.co.za\/cdn\/shop\/files\/tamiya-tam-56301-king-hauler-1-14-rc-kit.jpg?v=1693900095"},"aspect_ratio":1.196,"height":718,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/files\/tamiya-tam-56301-king-hauler-1-14-rc-kit.jpg?v=1693900095","width":859}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe Mighty King Hauler resembles the classic conventional American tractor truck. Powered by a 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with a leaf spring and shocks. The metal C-Channel ladder frame keeps the power to the pavement.\u003c\/p\u003e\n\u003ch4\u003ePLEASE NOTE: This is an assembly kit and requires a radio, servo, battery, charger, and paint to complete.\u003c\/h4\u003e\n\u003c\/div\u003e"}
Quick View
{"id":8022441558234,"title":"R\/C Mercedes-Benz C11 1990 (No ESC Incl.)","handle":"copy-of-r-c-1-10-porsche-911-gt3-992-tt02","description":"\u003ch5\u003eDESCRIPTION\u003c\/h5\u003e\n\u003ch2\u003e\u003cstrong\u003eTamiya 47484\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eTamiya welcomes back the 1\/10 R\/C 1990 Mercedes-Benz C 11 kit which was released as Item 58088 in 1990 and Item 58351 (finished body) in 2004. Although it’s been about 18 years since the last release, this model is still popular among R\/C fans because of its rich racing history heritage!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAbout the Mercedes-Benz C11\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe Mercedes-Benz C11 is a Group C prototype race car introduced for the 1990 World Sports-Prototype Championship. Built by Sauber as a successor to the Sauber C9, the C11 used the same Mercedes-Benz M119 5.0L twin turbo V8. It was the first time that Mercedes-Benz chose to put their name on the car, instead of simply using Sauber.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• 1\/10 scale R\/C model assembly kit. Length: 490mm, width: 206mm, height: 110mm.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Body and large rear wing are made from 1mm thick polycarbonate.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Composite chassis features ABS resin bathtub with front and rear space frames and FRP plates.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Direct drive 2WD chassis transmits motor power directly to spur gear.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 3-point suspension setup places the rear gearbox on a CVA oil-dampened T-bar. Ground clearance is adjustable (front: 2 settings, rear: 3 settings) according to running surfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Features ball differential and high-grip foam sponge tires.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• RS-540 Sport Tuned Motor included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e \u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-channel radio,\u003c\/li\u003e\n\u003cli\u003esteering servo,\u003c\/li\u003e\n\u003cli\u003eESC,\u003c\/li\u003e\n\u003cli\u003e7.2volt battery with\u003c\/li\u003e\n\u003cli\u003echarger,\u003c\/li\u003e\n\u003cli\u003eand Tamiya PS paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2023-07-18T12:28:18+02:00","created_at":"2023-07-18T12:28:18+02:00","vendor":"TAMIYA","type":"RC Car","tags":["NS2023","Tamiya","tamiya rc","tamiya rc homepage"],"price":299900,"price_min":299900,"price_max":299900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44002908209370,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Tam47484","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"R\/C Mercedes-Benz C11 1990 (No ESC Incl.)","public_title":null,"options":["Default Title"],"price":299900,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/files\/47484_1.jpg?v=1689676203"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/files\/47484_1.jpg?v=1689676203","options":["Title"],"media":[{"alt":null,"id":32496045326554,"position":1,"preview_image":{"aspect_ratio":1.333,"height":750,"width":1000,"src":"\/\/gpmodels.co.za\/cdn\/shop\/files\/47484_1.jpg?v=1689676203"},"aspect_ratio":1.333,"height":750,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/files\/47484_1.jpg?v=1689676203","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDESCRIPTION\u003c\/h5\u003e\n\u003ch2\u003e\u003cstrong\u003eTamiya 47484\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eTamiya welcomes back the 1\/10 R\/C 1990 Mercedes-Benz C 11 kit which was released as Item 58088 in 1990 and Item 58351 (finished body) in 2004. Although it’s been about 18 years since the last release, this model is still popular among R\/C fans because of its rich racing history heritage!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAbout the Mercedes-Benz C11\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe Mercedes-Benz C11 is a Group C prototype race car introduced for the 1990 World Sports-Prototype Championship. Built by Sauber as a successor to the Sauber C9, the C11 used the same Mercedes-Benz M119 5.0L twin turbo V8. It was the first time that Mercedes-Benz chose to put their name on the car, instead of simply using Sauber.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• 1\/10 scale R\/C model assembly kit. Length: 490mm, width: 206mm, height: 110mm.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Body and large rear wing are made from 1mm thick polycarbonate.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Composite chassis features ABS resin bathtub with front and rear space frames and FRP plates.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Direct drive 2WD chassis transmits motor power directly to spur gear.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• 3-point suspension setup places the rear gearbox on a CVA oil-dampened T-bar. Ground clearance is adjustable (front: 2 settings, rear: 3 settings) according to running surfaces.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Features ball differential and high-grip foam sponge tires.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• RS-540 Sport Tuned Motor included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e \u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-channel radio,\u003c\/li\u003e\n\u003cli\u003esteering servo,\u003c\/li\u003e\n\u003cli\u003eESC,\u003c\/li\u003e\n\u003cli\u003e7.2volt battery with\u003c\/li\u003e\n\u003cli\u003echarger,\u003c\/li\u003e\n\u003cli\u003eand Tamiya PS paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e"}
R 2,395.00
Quick View
{"id":8011964645594,"title":"R\/C 1\/10 TOYOTA GAZOO WRT\/GR YARIS RALLY1 HYBRID (TT02)","handle":"r-c-1-10-toyota-gazoo-wrt-gr-yaris-rally1-hybrid-tt02","description":"\u003ch5\u003eDESCRIPTION\u003c\/h5\u003e\n\u003cdiv class=\"product-main\"\u003e\n\u003cdiv class=\"product-main-bottom\"\u003e\n\u003cdiv class=\"row product-info-main full-width\"\u003e\n\u003cdiv class=\"product-bottom-left col-sm-14\"\u003e\n\u003cdiv class=\"short-description\"\u003e\n\u003cdiv class=\"std\"\u003eThis is a radio control assembly kit of the Toyota GAZOO Racing WRT\/GR Yaris Rally1 Hybrid that began competing in 2022 in compliance with Rally 1 restrictions. The combination of a hybrid unit integrated with a motor and generator and the engine is capable of over 500PS and 500Nm, while the car also features regenerative charging during brake function. A 1.6-liter inline 4-cylinder direct injection turbo engine uses non-fossil fuel. In addition to side skirts and a large rear wing, air ducts are equipped right and left at the rear to cool down the hybrid unit. In 2022, it achieved both Manufacturer’s and Driver’s Championships.\u003cbr\u003e\u003cbr\u003eAdaptable TT-02 Chassis offers balanced shaft driven 4WD\u003cbr\u003eThe shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings, and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.\u003cbr\u003e\u003cbr\u003e• 1\/10 scale R\/C model assembly kit. Length: 416mm, width: 190mm, height: 146mm.\u003cbr\u003e• Wheelbase: 257mm.\u003cbr\u003e• Lightweight, durable polycarbonate body.\u003cbr\u003e• Separate polycarbonate front light cases add a three-dimensional look. (Note: front LED lights cannot be attached).\u003cbr\u003e• Separate plastic parts molded in black realistically depict side mirrors, a 2-piece large rear wing, side ducts, and caps.\u003cbr\u003e• The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.\u003cbr\u003e• Dark gun metal color multi-spoke Wheels (Item 50678) are paired with racing radial tires (Item 50419).\u003cbr\u003e• Includes Urethane Bumper for crash protection.\u003cbr\u003e• Comes with stickers and window masking tape for use in the painting process.\u003cbr\u003e• Includes 540 Torque Tuned motor\u003cbr\u003e• Requires 2-channel radio, steering servo, 7.2-7.4volt battery with a compatible charger, and Tamiya PS paint to complete.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e1x R\/C Toyota GAZOO WRT\/GR Yaris Rally1 Hybrid (TT02) model assembly kit\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-bottom-right col-sm-10\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-collateral toggle-content tabs js-toggle-content\"\u003e\n\u003cdl class=\"collateral-tabs\" id=\"collateral-tabs\"\u003e\n\u003cdd class=\"tab-container current\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003c\/div\u003e","published_at":"2023-06-26T16:21:48+02:00","created_at":"2023-06-26T16:21:48+02:00","vendor":"TAMIYA","type":"RC Car","tags":["Tamiya","tamiya rc"],"price":239500,"price_min":239500,"price_max":239500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43974221431002,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAM58716","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"R\/C 1\/10 TOYOTA GAZOO WRT\/GR YARIS RALLY1 HYBRID (TT02)","public_title":null,"options":["Default Title"],"price":239500,"weight":0,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/files\/tausa58716-1.jpg?v=1689604549"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/files\/tausa58716-1.jpg?v=1689604549","options":["Title"],"media":[{"alt":null,"id":32492878954714,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/gpmodels.co.za\/cdn\/shop\/files\/tausa58716-1.jpg?v=1689604549"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/files\/tausa58716-1.jpg?v=1689604549","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDESCRIPTION\u003c\/h5\u003e\n\u003cdiv class=\"product-main\"\u003e\n\u003cdiv class=\"product-main-bottom\"\u003e\n\u003cdiv class=\"row product-info-main full-width\"\u003e\n\u003cdiv class=\"product-bottom-left col-sm-14\"\u003e\n\u003cdiv class=\"short-description\"\u003e\n\u003cdiv class=\"std\"\u003eThis is a radio control assembly kit of the Toyota GAZOO Racing WRT\/GR Yaris Rally1 Hybrid that began competing in 2022 in compliance with Rally 1 restrictions. The combination of a hybrid unit integrated with a motor and generator and the engine is capable of over 500PS and 500Nm, while the car also features regenerative charging during brake function. A 1.6-liter inline 4-cylinder direct injection turbo engine uses non-fossil fuel. In addition to side skirts and a large rear wing, air ducts are equipped right and left at the rear to cool down the hybrid unit. In 2022, it achieved both Manufacturer’s and Driver’s Championships.\u003cbr\u003e\u003cbr\u003eAdaptable TT-02 Chassis offers balanced shaft driven 4WD\u003cbr\u003eThe shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings, and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.\u003cbr\u003e\u003cbr\u003e• 1\/10 scale R\/C model assembly kit. Length: 416mm, width: 190mm, height: 146mm.\u003cbr\u003e• Wheelbase: 257mm.\u003cbr\u003e• Lightweight, durable polycarbonate body.\u003cbr\u003e• Separate polycarbonate front light cases add a three-dimensional look. (Note: front LED lights cannot be attached).\u003cbr\u003e• Separate plastic parts molded in black realistically depict side mirrors, a 2-piece large rear wing, side ducts, and caps.\u003cbr\u003e• The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.\u003cbr\u003e• Dark gun metal color multi-spoke Wheels (Item 50678) are paired with racing radial tires (Item 50419).\u003cbr\u003e• Includes Urethane Bumper for crash protection.\u003cbr\u003e• Comes with stickers and window masking tape for use in the painting process.\u003cbr\u003e• Includes 540 Torque Tuned motor\u003cbr\u003e• Requires 2-channel radio, steering servo, 7.2-7.4volt battery with a compatible charger, and Tamiya PS paint to complete.\u003cbr\u003e\u003cbr\u003eWhat's in the Box:\u003cbr\u003e1x R\/C Toyota GAZOO WRT\/GR Yaris Rally1 Hybrid (TT02) model assembly kit\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-bottom-right col-sm-10\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-collateral toggle-content tabs js-toggle-content\"\u003e\n\u003cdl class=\"collateral-tabs\" id=\"collateral-tabs\"\u003e\n\u003cdd class=\"tab-container current\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003c\/div\u003e"}
R 2,695.00
Quick View
{"id":8011963597018,"title":"R\/C 1\/10 PORSCHE 911 GT3 (992) (TT02)","handle":"r-c-1-10-porsche-911-gt3-992-tt02","description":"\u003ch5\u003eDESCRIPTION\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis R\/C model assembly kit recreates the Porsche 911 GT3 (992) with a stunning and highly detailed polycarbonate body. The kit is based on the beginner-friendly and highly customizable TT-02 chassis. The full-size 7th generation model, Porsche 911 GT3 features double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight components and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives a lightweight design. Also, hanging-type wing stays supplies greater downforce and lower drag.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdaptable TT-02 Chassis offers balanced shaft driven 4WD\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings, and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Mesh-type wheels are paired with racing slick tires.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• 1\/10 scale R\/C model assembly kit. Length: 467mm, width: 188mm, height: 131mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Wheelbase: 251mm (Short-size wheelbase spec).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Lightweight, durable polycarbonate body with separate polycarbonate rear wing and light cases.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Separate plastic parts molded in black realistically depict side mirrors and wing stays.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• The model uses the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Dark gun metal color spoke wheels are paired with racing radial tires.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Includes motor.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Comes with trim detail stickers and window masking tape for use in the painting process.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Requires 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint to complete.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhat's in the Box:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1x R\/C Porsche 911 GT3 (992) (TT02) model assembly kit\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2023-06-26T16:17:48+02:00","created_at":"2023-06-26T16:17:48+02:00","vendor":"TAMIYA","type":"RC Car","tags":["Tamiya","tamiya rc","tamiya rc homepage","TRCHP"],"price":269500,"price_min":269500,"price_max":269500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43974220644570,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TAM58712","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"R\/C 1\/10 PORSCHE 911 GT3 (992) (TT02)","public_title":null,"options":["Default Title"],"price":269500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/gpmodels.co.za\/cdn\/shop\/files\/58712_1.jpg?v=1689603598"],"featured_image":"\/\/gpmodels.co.za\/cdn\/shop\/files\/58712_1.jpg?v=1689603598","options":["Title"],"media":[{"alt":null,"id":32492843991258,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/gpmodels.co.za\/cdn\/shop\/files\/58712_1.jpg?v=1689603598"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/gpmodels.co.za\/cdn\/shop\/files\/58712_1.jpg?v=1689603598","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDESCRIPTION\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis R\/C model assembly kit recreates the Porsche 911 GT3 (992) with a stunning and highly detailed polycarbonate body. The kit is based on the beginner-friendly and highly customizable TT-02 chassis. The full-size 7th generation model, Porsche 911 GT3 features double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight components and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives a lightweight design. Also, hanging-type wing stays supplies greater downforce and lower drag.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdaptable TT-02 Chassis offers balanced shaft driven 4WD\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings, and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Mesh-type wheels are paired with racing slick tires.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• 1\/10 scale R\/C model assembly kit. Length: 467mm, width: 188mm, height: 131mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Wheelbase: 251mm (Short-size wheelbase spec).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Lightweight, durable polycarbonate body with separate polycarbonate rear wing and light cases.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Separate plastic parts molded in black realistically depict side mirrors and wing stays.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• The model uses the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Dark gun metal color spoke wheels are paired with racing radial tires.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Includes motor.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Comes with trim detail stickers and window masking tape for use in the painting process.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Requires 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint to complete.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhat's in the Box:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1x R\/C Porsche 911 GT3 (992) (TT02) model assembly kit\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e"}
